Water-based varnish for outdoor use
IMPREGNATION WITH BIOCIDE
Characteristic: General wood preservative. Available in different shades with micronised pigments (iron oxides), impeding the negative action of the UV rays. Biocidal action against fungi and insects. The process is finished by applying two coats of "Iruxil SBA-600 Natural", which gives an overall appealing appearance.
|IRUXIL W-I-500 Natural||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-510 Pine||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-520 Teak||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-530 Oak||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-540 Chestnut||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-550 Walnut||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-560 Dark walnut||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-570 Mahogany||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-580 Ebony||20 lt. / 5 lt.||–||–|
IMPREGNATION WITH BIOCIDE (Hazard Class 3)
Characteristic: Preservative certified with Hazard Class 3 in accordance with EN-335 (direct exposure to the weather without being in contact with the ground).
|IRUXIL CR3-300 Natural||20 lt. / 5 lt.||–||–|
IMPREGNATION WITHOUT BIOCIDE
Characteristic: Range of preservatives in different colours. The difference to the "Iruxil W-I-500" range is that it does not contain biocide. They therefore do not need to be certified by the Ministry of Health and Consumption (MSC).
|IRUXIL SBI-200 Natural||20 lt.|
ANTI-TANNIN IMPREGNATION WITHOUT BIOCIDE
Characteristic: Colourless anti-tannin impregnation. Works by blocking the tannic substances in certain woods used basically in outdoor carpentry (oak, chestnut, merbau, iroko, etc).
|IRUXIL SBI-A-10 Anti-tannin||20 lt.|
Characteristic: White anti-tannin preservative. Like its counterpart "Iruxil SBI-A-10 Anti-tannin", it acts to block tannins which may be found in timber used in outdoor carpentry (oak, chestnut, iroko, merbau, etc). The phenomenon manifests itself more dramatically in white processes, with yellowing appearing to a greater or lesser degree in the pores of the wood.
|IRUXIL SBI-A-14 White anti-tannin||20 lt.|
ANTI-TANNIN IMPREGNATION WITH BIOCIDE
Characteristic: Range of preservatives with a dual function: block the tannins present in specific types of wood used in carpentry in outdoor conditions, and avoid photodegradation of the combined action of sunlight and abiotic agents (water, ice, frost, polluted air, smog, etc).
|IRUXIL W-I-505 Anti-Tannin Natural ||20 lt. / 5 lt.|
|IRUXIL W-I-515 Anti-Tannin Pine||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-525 Anti-Tannin Teak||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-535 Anti-Tannin Oak||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-545 Anti-Tannin Chestnut||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-555 Anti-Tannin Walnut||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-565 Anti-Tannin Dark Walnut||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-575 Anti-Tannin Mahogany||20 lt. / 5 lt.||–||–|
|IRUXIL W-I-585 Anti-Tannin Ebony||20 lt. / 5 lt.||–||–|
Characteristic: Basecoat for spray application (airbrush, airmix or airless), biocide-free. Drying and curing comes about quickly and in a controlled manner under proper aeration, temperature and humidity conditions. Provides good sanding and excellent recoating when finished with "Iruxil SBA-600 Natural" or similar.
|IRUXIL SBF-700||20 lt.||–||–|
Characteristic: Basecoat developed specifically for flow-coating. Its viscosity is suitable for this type of application, ensuring correct performance whenever the geometry of the piece is not particularly perverse.
|IRUXIL SBF-702||20 lt.||–||–|
Characteristic: This is the white version of Iruxil SBF-700. Depending on the type of wood to be varnished, take into account the possible influence of tannins (if any). Easy to apply using traditional spray procedures, with drying, curing, sanding and recoating with "Iruxil SBA-6006 White" type coatings.
|IRUXIL SBF-720 White||24 kg.||–||–|
Characteristic: Coating which completes the varnishing cycle for different kinds of wood for outdoor exposure, which have been impregnated with "Iruxil W-I-500" range components. Notable for its excellent application using airmix and airbrush equipment, excellent thixotropy, smoothness, uniform highlighting, touch and appearance.
|IRUXIL SBA-600 Natural||20 lt. / 5 lt. / 0.75 lt||–||–|
|IRUXIL SBA-600-1 Natural matte||20 lt. / 5 lt. / 0.75 lt||Matte||–|
Characteristic: Coating to finish off the different wood varnish cycles for outdoor exposure. Completes the cycle started by applying "Iruxil W-I-500" range preservatives (typically by way of flow-coating systems) using airless units with feeder pumps with compression ratios above 34 or 40:1. Maximum thixotropy with excellent aesthetic and mechanical properties.
|IRUXIL SBA-6000 Natural||20 lt. ||–||–|
|IRUXIL SBA-6000-1 Natural matte||20 lt. ||Matte||–|
Characteristic: Similar to "Iruxil SBA-6000 Natural", but substantially more thixotropic. Applied in finishing pieces impregnated through flow-coating, combined with an airless spray gun fed with a piston pump with a compression ratio of above 40:1 and high nozzle pitches (13-15-18).
|IRUXIL SBA-6000 Natural TIX||20 lt. ||–||–|
|IRUXIL SBA-6000-1 Natural matte TIX||20 lt. ||Matte||–|
Characteristic: White coating for wood treatment in weather-exposed conditions. Lightfast. If the substrate contains tannins (iroko, merbau, oak, etc) and even traces of resin (pine, fir, etc), add 5% of "Curing Agent R-403" to block them.
|IRUXIL SBAE-6006 White||20 lt. / 5 lt.||–||–|