Characteristic: Nitrocellulose base which, by adding a specific amount of sawdust, can be used to fill in and cover certain defects of parquet and decking. Application is usually with a spatula or float.
|EGURPLAST 1||10 lt. ||–||–|
Characteristic: High dry extract basecoat for application to wooden floors. Easy to apply with float, short nap roller or brush. Excellent humidification of the substrate, good transparency, satisfactory sanding (manual and automatic) and excellent recoating are the most outstanding characteristics.
|AZPIFOND F-2015||10 lt. / 4 lt.||–||–|
|CATALYST 2015||10 lt. / 4 lt.||–||–|
Characteristic: Single-component polyurethane topcoat which reacts to environmental humidity. Can be applied to a properly prepared and sanded substrate in three coats. Provides a high gloss finish with excellent chemical and mechanical properties.
|GOYLAKE A-800 Gloss||4 lt. / 1 lt. ||Gloss||–|
Characteristic: Matte polyurethane coating. Notable for the uniform highlighting after application with a short nap roller or brush. Its excellent spreadability with a brush provides good performance in the "joints". High range coating, high performance with excellent chemical and mechanical properties.
|GOYLAKE A-2034 Matte||20 lt. / 4 lt. ||Matte||–|
|CATALYST C-2034||5 lt. / 1 lt.||–||–|
Characteristic: Easy to mix (ratio 1:1). Combines spread (brush/roller) with a good trade-off between physical, chemical and mechanical properties.
|GOYLAKE A-2038 Satin||10 lt. / 4 lt. ||–||–|
|CATALYST C-2038||10 lt. / 4 lt. ||–||–|
Characteristic: Careful mix ratio (1:1). Easy to apply (brush/roller) and good gloss retention thanks to careful wear and abrasion resistance.
|GOYLAKE A-2054 Gloss||10 lt. / 4 lt. ||Gloss||–|
|CATALYST 2054||10 lt. / 4 lt. ||–||–|